Embedded World returns to Nuremberg on 26-28 February 2019!

ADL is pleased to confirm that our Technology Partner Active Silicon will be presenting their
latest PCIe/104 products at our booth!

Hall 1 / Booth 1-554
Embedded World 2019
Nuremberg

You will be able to see the Phoenix PCI/104e Camera Link frame grabber and FireBird Quad USB 3.0 Host Controller. The frame grabbers include the ActiveDMA technology which transfers data directly to PC memory without any host CPU intervention, offering faster processing for data acquired from a variety of Camera Link sources, including digital frame capture and line scan cameras. The host controller uniquely configures each pair of its four USB 3.0 ports to use a single lane Gen2 PCI Express interface, thereby eliminating inconsistencies resulting from shared bandwidth.

 

Phoenix-D48CL a PCI/104-Express board for the acquisition of digital data from a variety of Camera Link sources, including digital frame capture and line scan cameras. It supports all the formats of the Base and Medium configurations, i.e. single 8 to 16 bit data, through 12 bit RGB, to four tap 12 bit sources, as well as dual Base configuration, i.e. acquisition from two asynchronous Base cameras.

FireBird Quad USB 3.0 Host Controller supports four USB 3.0 ports arranged as two ports per host controller with each controller having its own PCI Express x1 Gen2 interface to give a combined total data throughput of 10 Gbps. The USB 3.0 Host Controllers used are the proven Renesas™ μPD720202. Many USB 3.0 Host Controllers found on motherboards and processor modules share bandwidth with other devices typically resulting in inconsistent performance in demanding applications such as high-speed acquisition from USB3 Vision cameras. The FireBird Quad USB 3.0 Host Controller solves this problem by configuring each pair of USB 3.0 ports to use a single lane Gen2 PCI Express interface. Similarly this architecture provides a balance between cost and performance – so that two USB 3.0 devices may operate simultaneously at full bandwidth, or four devices operating simultaneously sharing the combined bandwidth of two full speed links. The board incorporates a dedicated power supply for USB to ensure reliable device operation independent of the main system power supply. The output is set to 5.1V to compensate for voltage drop along long reach USB3 cables. Software support is based on the proven Renesas™ driver stack which provides the high throughput required by USB3 Vision cameras.  Combined with the GenICam standard, these international vision standards in turn provide compatibility with a wealth of third-party applications allowing rapid product development and integration.

 

>> ... Embedded vision systems are being deployed in more application fields than ever as even more sectors are embracing the opportunities of faster and more connected image processing. Partnering with established and successful organizations such as ADL helps us to support more projects in science and industry and bring lightning-fast solutions to vision systems around the world ... <<< Active Silicon Ltd.

#ew #ew19 #embedded #embeddedworld #vision #activesilicon #framegrabber #usb3 #cameralink

Dear customers, partners & suppliers,

We are pleased to announce that ADL's robust industrial solutions and services will be presented at the 
EVERTIQ EXPO CRACOW 2018
issued by our esteemed integrator and partner Quantum TTC Ltd.!

Take advantage of this opportunity.
Come on 04 October 2018
between 09:00 to 16:00 o'clock
to the fair at the Best Western Premier Kraków Hotel

Official link to the website of our partner and distributor:
Quantum TTC Ltd.

READ THE FULL ARTICLE: HERE

HIGHLIGHTS:
Several exhibitors showcasing their products and services.
Meet ADLQ170HDS latest performance 3.5"-SBC and ADLE3800SEC smalles industrial grade x86 Atom SBC as well as its chassis integrated IPC - the ADLEPC1500 there!
A premier technical conference for Electronics Designe Engineers presenting new research and innovations from experts in the field of Design and Components.
Lunch buffet and coffee breaks for you to mingle and talk with customers and colleagues.

Tags:

#ADL #visit #show #EVERTIQ #EXPO #EVERTIQEXPO  #day1 #chance #freeconsulting #CRACOW #review #success

Dear customers, partners & suppliers,

we are pleased to announce that ADL will visit the trade fair in Nuremberg
SENSOR+TEST 2018
on 27.06.2018

Take this chance!
invite our team for a free design-in workshop at your booth!

You will receive a personal presentation of the solutions and services from the current ADL portfolio.

Mrs. Niosha Rajabi (Area Sales Mgr. DACH)	Mr. Björn Laupert (Head of  Technical Sales & Marketing)
Email: niosha.rajabi@adl-europe.com Tel:         +49 (0) 271 250810 15 Fax:        +49 (0) 271 250810 20 Mobile:   +49 (0) 160 8858 730	Email: bjoern.laupert@adl-europe.com Tel:         +49 (0) 271 250810 13 Fax:        +49 (0) 271 250810 20 Mobile:   +49 (0) 160 8858 732

SENSOR+TEST is the leading forum for sensors, measuring and testing technologies worldwide. 

The 2017 trade fair with its 569 exhibitors from 29 nations imposingly presented the entire spectrum of measuring and testing system expertise from sensors to computers.

The conferences in parallel to the exhibition - ettc2018 European Test and Telemetry Conference and 19. ITG/GMA-Fachtagung Sensoren und Messsysteme 2018 - will enrich the event with scientific facts and outlooks for the future of this industry.


Venue
Nürnberg Exhibition Centre  

Date
26.-28.6.2018
 
Opening hours
26.6.  -  9 a.m. - 6 p.m.
27.6.  -  9 a.m. - 6 p.m. 
28.6.  -  9 a.m. - 5 p.m.

Ticket Office
1-day ticket EUR 24,00

Free Admission voucher
You can make use of our electronic pre-registration service to receive your free personal admission voucher (worth: EUR 24,00) within a few secounds as pdf-file. Upon presentation of this voucher to the cashier you will be entitled to a free 1-day-ticket.

Tags:

#ADL #visit #show #sensortest #day2 #chance #freeconsulting #nuremberg

Embedded World 2019 - 1st Preview

Embedded World Conference - Embedded Intelligence

The embedded world Conference is the world's leading meeting place for the embedded community. In an interview with Frank Riemenschneider, editor-in-chief of the organiser DESIGN&ELEKTRONIK, Prof. Axel Sikora, Chairman of the Steering Board, explains what embedded intelligence is all about.

Every year, experienced developers come together in Nuremberg to share their knowledge and help others turn ideas and innovations into real products. In its 17th year, the conference takes up the title of one of its predecessors from the 1990s. In the past, embedded intelligence was more of a vision of the future, but today it is becoming more and more a reality and is shaping more and more systems: from autonomous vehicles, image recognition and embedded vision systems to preventive and demand-oriented maintenance in Industry 4.0 systems, from small computers to high-performance cloud servers. These developments not only open up immense opportunities and business opportunities, but are also closely linked to many technical, economic, social and ethical issues.

In an interview with Frank Riemenschneider, editor-in-chief of conference organizer DESIGN&ELEKTRONIK, Prof. Axel Sikora, Chairman of the Steering Board, explains which technologies such as AI (artificial intelligence) and ML (machine learning) will be used in the embedded industry in the future to make them "smarter".

Next year's ADL news:

With a focus on the smallest possible form factors, ADL Embedded Solutions presents the new single-board computers with the highest packing density and performance in the industry.

Perfect choice for HPEC (High Performance Embedded Computing) with computation-intensive tasks in audio and video processing. Embedded intelligence is highly dependent on high computing power and real-time capability. ADL offers a wide range of solutions from embedded processor boards to turnkey IPC Box systems:

With over 2,100 participants, the embedded world Conference is the largest event of its kind worldwide. The audience are competent, knowledge-hungry embedded system developers, specialists, project and product managers. The conference is part of the dynamic environment of embedded world, which with its 32,000 visitors over the years has become an international meeting place for the professional embedded developer community.

You are invited to present forward-looking technologies and solutions, new ideas and intelligent concepts for efficient development and life cycle processes. Use your presentation to initiate fruitful discussions and help other engineers and managers benefit from your experience.

Read more about Embedded World 2019 Conference : here

#EW #EW19 #EW_19 #embeddedworld2019 #freetickets #tickets #ecode #ADL #new #embedded #industrial #hardware #giesecke #security #crypto #IoT #iIoT #day1 #day2 #day3